Need help? Go to the FujiNet Wiki!

NETWORK
FujiNet version
<%FN_VERSION%>
Device name
Host name
<%FN_HOSTNAME%>
IP address
Default gateway
DNS server
HARDWARE
Detected Hardware Version
<%FN_HARDWARE_VER%>
System
<%FN_UNAME%>
Current time
<%FN_CURRENTTIME%>
FujiNet uptime
Restart FujiNet
HOSTSLIST
Host 1 [EDIT]
<%FN_HOST1%> :: <%FN_HOST1PREFIX%>
Host 2 [EDIT]
<%FN_HOST2%> :: <%FN_HOST2PREFIX%>
Host 3 [EDIT]
<%FN_HOST3%> :: <%FN_HOST3PREFIX%>
Host 4 [EDIT]
<%FN_HOST4%> :: <%FN_HOST4PREFIX%>
Host 5 [EDIT]
<%FN_HOST5%> :: <%FN_HOST5PREFIX%>
Host 6 [EDIT]
<%FN_HOST6%> :: <%FN_HOST6PREFIX%>
Host 7 [EDIT]
<%FN_HOST7%> :: <%FN_HOST7PREFIX%>
Host 8 [EDIT]
<%FN_HOST8%> :: <%FN_HOST8PREFIX%>
MOUNTLIST
Drive Slot 1<%FN_DRIVE1DEVICE%> [EJECT]
<%FN_DRIVE1HOST%> :: <%FN_DRIVE1MOUNT%>
Drive Slot 2<%FN_DRIVE2DEVICE%> [EJECT]
<%FN_DRIVE2HOST%> :: <%FN_DRIVE2MOUNT%>
Drive Slot 3<%FN_DRIVE3DEVICE%> [EJECT]
<%FN_DRIVE3HOST%> :: <%FN_DRIVE3MOUNT%>
Drive Slot 4<%FN_DRIVE4DEVICE%> [EJECT]
<%FN_DRIVE4HOST%> :: <%FN_DRIVE4MOUNT%>
Drive Slot 5<%FN_DRIVE5DEVICE%> [EJECT]
<%FN_DRIVE5HOST%> :: <%FN_DRIVE5MOUNT%>
Drive Slot 6<%FN_DRIVE6DEVICE%> [EJECT]
<%FN_DRIVE6HOST%> :: <%FN_DRIVE6MOUNT%>
Drive Slot 7<%FN_DRIVE7DEVICE%> [EJECT]
<%FN_DRIVE7HOST%> :: <%FN_DRIVE7MOUNT%>
Drive Slot 8<%FN_DRIVE8DEVICE%> [EJECT]
<%FN_DRIVE8HOST%> :: <%FN_DRIVE8MOUNT%>
Drive Slots
PrinterSettings
Click to download your current print-out
Download your current print-out
ModemSettings
Click to download modem sniffer log
Download modem sniffer log
UDPStream
If port not supplied, default is 5004 for MIDIMaze.
Example: example.com:6502
MIDIMaze example: 192.168.0.1 or 192.168.0.1:5004
ProgramRecorder
<%FN_PLAY_RECORD%>
<%FN_PULLDOWN%>
Press to rewind cassette
CP/MSettings
Custom CCP must be a valid path on the SD Card
Example: /some/directory/custom.ccp
Set CCP to $ for default built-in CCP
SerialPort
Serial port for communication with a CoCo computer.
Note: To use it, configure above settings and disable communication with emulator.
EmulatorSettings
When enabled, FujiNet will not use the serial port for DriveWire communication. Instead, it will use TCP to communicate with a CoCo emulator. Port is optional (defaults to 65504).
BootSettings